Chatillon Gripping Fixtures

Stainless steel Jacobs chuck grips hold small cylindrical samples up to 5/32" (4 mm). Has 10-32 thread mounting. Capacity: 20 lb; Weight: 4 oz.

Applications: Ideal for holding small cylindrical samples during tension or compression testing.

1/4" Drill Chuck Pin Vise (GF-52)

Stainless steel Jacobs chuck grips hold small cylindrical samples up to 1/4" (6 mm). Has 10-32 thread mounting. Capacity: 20 lb; Weight: 4 oz

Applications: Ideal for holding small cylindrical samples during tension or compression testing.

These square shaped direct compression platens may be used for performing general purpose low force compression tests. Comes complete with upper and lower compression platens.

Applications: Used for general purpose compression testing of a wide variety of small components, materials and products. Used to determine the following types of compression characteristics:

• Compressive Yield Strength
• Compressive Strength
• Offset Yield Stress
• Percentage Compressive Strain at Compressive Yield Stress
• Percentage Compressive Strain at Rupture
• Compressive Stress at Specified Compressive Strain

This circular direct compression fixture is ideal for general purpose low force compression testing.
Packaging: single item complete with upper and lower compression platens.
Applications: Used to determine compression characteristics at low force for small components and specimens including:

• Compressive Yield Strength
• Compressive Strength
• Offset Yield Stress
• Percentage Compressive Strain at Compressive Yield Stress
• Percentage Compressive Strain at Rupture
• Compressive Stress at Specified Compressive Strain

Circular direct compression platens intended for samples up to 150 mm (5.91") in diameter. Used for general purpose compression testing in a wide variety of materials and products. 22480 lb capacity.

Circular compression jig features linear bearing guides to maintain parallel alignment of face plates during testing. Comes complete with upper and lower compression platens.

Applications: Ideal for compression testing of corrugated materials such as cardboard and paper products. The test specimen is placed between the platens of a crush tester with the flutes perpendicular to the platens.

These direct compression platens feature a rectangular shape and are ideal for samples up to 175mm x 115mm (6.9 x 4.5 in).
Packaging: single item complete with upper and lower compression platens.

Applications: Used for general purpose compression testing for a wide range of materials and finished products. Used to determine the following types of compression characteristics:

• Compressive Yield Strength
• Compressive Strength
• Offset Yield Stress
• Percentage Compressive Strain at Compressive Yield Stress
• Percentage Compressive Strain at Rupture
• Compressive Stress at Specified Compressive Strain

General purpose rectangular direct compression platens for samples up to 175mm x 115mm (6.9 x 4.5 in).
Packaging: single item complete with upper and lower compression platens.

Applications: Used for low force compression testing of foams, boards, composites, metals, wood products and packaging materials and products. Used to determine the following types of compression characteristics:

• Compressive Yield Strength
• Compressive Strength
• Offset Yield Stress
• Percentage Compressive Strain at Compressive Yield Stress
• Percentage Compressive Strain at Rupture
• Compressive Stress at Specified Compressive Strain

Ideal for specimens as small as 2mm (3/32 in) in diameter, this miniature wedge grip features hardened steel, serrated jaw faces. Throat depth is 12mm (0.5 in). A spring force lever permits quick release of the jaw face for simple loading or removing of the specimen.

Grip is provided with a #10-32 female thread for direct attachment to the Chatillon light duty gauges up to 100 lb. Capacity: 100 lb; Upper grip weight: 1 oz; Combined grip length: 2-1/8"

Applications: Used for general purpose tensile testing.

This self-tightening wedge grip is ideal for specimens 25mm (1.0 in) wide and 6mm (0.25 in) in diameter. The throat depth is 35mm (1.5 in). This grip features a spring force lever, to quickly release the jaws, and serrated, hardened steel faces.

Applications: Used for general purpose tensile testing

This general purpose sliding wedge grip is self tightening. It is supplied with standard 25 x 50mm (1.0 x 2.0 in) straight cut jaw faces. Optional jaw faces are available. The TG15 is not supplied when ordering optional jaw faces.

Packaging: includes upper and lower grips with standard straight cut face.

Applications: Used for tensile testing of flat and round rigid materials including plastic and light metals

Lightweight, spring loaded, rubber raced clamp grips for very light loads. Ideal for paper, thin plastic film, foils, etc. 1.12 lb

Used for tensile testing of paper, thin plastic film and foils, etc by stretching the sample to fracture and recording the relationship between force and extension.

Capacity: 30kN (6744 lbs)

This capstan action, parallel wedge grip supplied with straight cut faces. It is ideal for flat specimens. The capstan action holds samples securely in the jaws prior to the test. Optional jaw faces are available.

Includes upper and lower grips with standard straight cut faces

Used for tensile testing in general metallurgical and composite applications.