|
The TCD-200 becomes a self-contained motorized test stand when equipped
with a Chatillon DFS, DFS-R, DFS-R-ND, DFA, DFIS or DFGS digital gauge. The standard bi-directional
RS232 interface permits peripheral control of all keypad functions of
the DFS, DFS-R, DFS-R-ND, DFA, DFIS or DFGS digital gauges. Both force
and deflection data may be transmitted or requested through the test
stand
interface. Analog outputs are also provided for graphing.
The rugged all-metal construction offers durability for both laboratory
and production floor applications. The ball screw drive with dual
column alignment ensures precise linear motion as well as a high level
of accuracy in the deflection measurement. Dynamic braking provides
positive control of the motor.
Programming of test speed, high and low digital deflection set points
and cycling as well as basic functions are activated via the keypad. "Min
speed" and "max speed" functions are also included in order
to facilitate test set up.
Two 1/2" high LCD's display the speed and deflection values along
with status indicators of the programmed functions and units of measurement
(inches or millimeters). This provides the operator a quick easy
to read reference of not only test values but test parameters as well.
If a Chatillon DFS, DFS-R, DFS-R-ND, DFA, DFIS or DFGS digital force gauge is used and
interfaced with the stand electronics via the proper cable, the word "gauge"
is displayed to indicate this connection.
When using a Chatillon DFGS digital force
gauge as the force indicator, the gauge's force set points may be programmed
to signal the test stand motor to stop or cycle between the set points.
This provides even further automation in product testing.
Features:
- Digital control with programming capability
- Bi-directional RS232 interface
- Digital deflection set point capability
- Cycling capabilities: programmable up to 1000 cycles between digital
deflection set points or force set points when used with a Chatillon DFGS digital force gauge
- Ball screw drive with dynamic braking
- Manually adjustable upper and lower travel limits
- Vertical travel distance: 0-18" x 0.001" (0-457.2 mm x 0.01
mm)
- Travel speed: programmable 0.5 - 12.5 x 0.01 inches/min (12.7 to 317.5
x 0.1 mm/min)
- 2-1/4" (57 mm) horizontal clearance between platform centerline
and column
- Standard mounting for Chatillon DFS, DFS-R, DFS-R-ND, DFA, DFGS, and
gauges. Click here to view Test Stand
and Force Gauge compatibility chart.
Options:
- 50" (1270 mm) column (18" travel)
- Slow speed: 0.02 to 0.5 inches/min (0.5 to 12.77 mm/min)
- Medium slow speed: 0.1 to 2.5 inches/min (2.5 to 62.5 mm/min)
- Medium High Speed: 1 - 25 x 0.1 inches/min (25 - 635 x 1 mm/minute)
- High speed: 2 to 50 x 0.1 inches/min (50 to 1270 x 1 mm/min)
- Interface cables
- Gripping fixtures are available to fill a
wide range of needs.
Specifications:
- Capacity: 200 lb or 1000N (high speed: 100 lb or
500 N)
- Accuracy: ±5% of max speed
- Deflection accuracy: ±0.1% of reading or ±0.004 inches
(±0.1 mm)
- RS232: 9 pin "D" connector: Transmission
parameters user selectable. Baud rate selectable from 300 to 19,200
- Analog Output: 0.056 Volt per inch ±3%
- Stand dimensions: 35" H x 14 W x 16-1/2" D (889 mm x 356
mm x 419 mm)
- Power requirement: 110 Vac (220 Vac available)
- Weight: Instrument: 42 lbs
Model |
Description |
Price |
TCD-200 |
TCD-200 Digital Test Stand,
200 lb capacity |
$5225 |
TCD-200SS |
TCD-200
Digital Test Stand, Slow Speed (0.02 to 0.5 inch/minute) |
$5320 |
TCD-200MS |
TCD-200 Digital Test Stand,
Medium-Slow Speed (0.1 to 2.5 inch/minute) |
$5320 |
TCD-200HS |
TCD-200 Digital Test Stand,
High Speed (2.0 to 50.0 inch/minute) |
$5320 |
| NC000300 |
Mounting Kit for remote load cells |
$90.25 |
Click here for additional
specifications
(Adobe PDF)
|
